Lavender varnish - 50 ml

The Symbol : 108

Lavender varnish 50 ml – ambrotype, surface protection, sandarac resin

39.00
opak
Reviews
lack of ratings
Shipping within 3 days
Shipping price The Lack Of
The Availability Of Low stock
The Weight Of The 0.15 kg

Phone: 48793015354

Lavender Sandarac Varnish 50 ml – for Ambrotypes and Wet Plate Collodion

Lavender Sandarac Varnish from Alternative Photographic Supplies is a ready-to-use preparation designed to protect photographic images produced using the wet plate collodion process. Based on natural sandarac resin, it follows the tradition of historical varnish formulations used in 19th-century photography.

The varnish forms a thin, transparent coating over the image, reducing direct exposure of the delicate collodion layer to dust, moisture and contaminants. It also provides a degree of protection against accidental surface damage when handling the finished plate.

Varnishing is one of the final stages in preparing an ambrotype and plays an important role in both protecting the image and determining its surface finish.

Applications of Lavender Sandarac Varnish

The preparation is primarily intended for:

  • Ambrotypes – protecting collodion images on glass plates.

  • Tintypes (ferrotypes) – finishing and protecting collodion images on metal supports.

  • Wet plate collodion glass negatives – protecting the image surface from direct contact with the environment.

Properties of Sandarac Varnish

  • Natural sandarac resin – forms a transparent protective layer over the collodion surface.

  • Traditional formulation – based on varnishing methods used in historical photographic processes.

  • Transparent coating – preserves the visibility of the image, although it may slightly alter the gloss and appearance of the surface.

  • Mechanical protection – helps reduce the risk of accidental damage to the delicate collodion layer.

  • Ready-to-use solution – does not require preparing varnish from resin and solvents.

  • Heat-cured finish – designed for traditional varnishing followed by controlled heat treatment.

Application in the Wet Plate Collodion Process

Lavender sandarac varnish is used to finish and protect completely dry collodion plates. It is intended for traditional varnishing with heat treatment, often referred to in historical photographic practice as heat-curing the varnish.

The varnish is applied to a suitably prepared plate and distributed evenly over the image surface, allowing the excess to drain away. The coating is then subjected to controlled heating, following the procedure appropriate for sandarac varnish.

Heat treatment is an important stage in finishing the coating. Incorrect temperatures or excessive heating may damage the collodion layer, cause discolouration or result in an uneven surface finish.

Important: The preparation contains flammable ingredients and releases flammable vapours. Varnishing and heat treatment must be carried out in a suitably ventilated area, keeping the liquid varnish and its vapours away from open flames.

Technical Specifications

  • Manufacturer: Alternative Photographic Supplies (Szlachetna Fotografia)

  • Product: Lavender sandarac varnish

  • Type: Ready-to-use varnish for wet plate collodion

  • Main coating ingredient: Natural sandarac resin

  • Volume: 50 ml

  • Finishing method: Traditional varnishing with heat treatment (heat-curing)

  • Applications: Ambrotypes, tintypes (ferrotypes), wet plate collodion glass negatives

  • Purpose: Finishing and protecting photographic images produced using the wet plate collodion process

Manufacturer details

Szlachetna Fotografia
ul Akacjowa 1
83-034 Trąbki Wielkie
Poland

609168620
kontakt@szlachetnafotografia.com